Avoid The Ryan
Different Methods Used For Laser Cut

Different Methods Used For Laser Cut

Technology can be a surprise every moment. This technology has developed a non-contact way of cutting different materials, i.e., laser cut. It is a technique that uses high energy and density control to cut different materials. The beam focuses on the material a forms a light spot that further cuts it. It is, in a way, a non-conventional form of cutting and are directed using computer-aided designs. The different types of laser cut methods are:

Fusion cutting

This technique involves a molten material i.e. the cutting is done by a liquid. The material that is to be cut is partially melted and then the liquid is ejected by airflow. It is a much faster technique and requires lesser energy than gasification. The laser beam is also partially absorbed.

Vaporization cutting

This one involves gasification. The surface temperature of the material rises to the boiling point in high speed. This, in turn, avoids melting due to heat conduction. The thickness of the material in laser cutting Perth should not increase the diameter of the laser beam in order to protect the slit wall from being condensed. This method is usually used in small areas for ferrous alloys. Wood and ceramics are not cut using this technique.

Fracture-controlled cutting

This is a high-speed laser beam cutting that can be controlled. Usually, the materials that are brittle and prone to heat damage are cut using this method. The laser beam creates a crack in the brittle material as it cannot handle the heat of the beam. The heating gradient is controlled in order to create cracks in different directions.

Laser flame cutting

This is also known as oxidation melting cutting as the process involves the use of an inert gas like oxygen thereby heating up the material with the help of the laser. The cutting speed of pool roller covers is faster than the fusion cutting. It might not be able to create cuts as precise as you require. The only limiting factor in this cutting method is the supply of oxygen.

These are a few laser cut methods used to cut different materials. These four are the most commonly used methods. Each process required different equipments and cutting plans according to the material that is being cut. Laser cut is usually done during industrial manufacturing processes and needs high power. Make sure that you choose the right shop or website where you can buy the products. Review each one before you buy.

Leave a Reply

Your email address will not be published. Required fields are marked *

Show Buttons
Hide Buttons
Back to Top